TCP/IP
- Click on the Apple and select Control
Panel, then select TCP/IP.
- At the top of the dialog box, the Connect via:
selection should be PPP.
- Next, in the list box labeled Configure, select
Using a PPP Server.
- In the next three listboxes, named IP address,
Subnet Mask, and Router address, select will be supplied
by server.
- In the text box labeled Name server
address.:, erase any existing numbers and replace them
with:
66.77.68.8
66.77.68.9
- In the text box labeled Search
Domains, enter the following domain names in the order
listed:
purespeed.com
- Close the dialog box and select Save when
prompted.
Modem
- Click on the Apple and select Control
Panel, then select modem.
- At the top of the dialog box, the Connect via:
selection should be Modem/printer port for a desktop computer, or
powerport for notebooks and laptops.
- In the listbox labeled modem, make sure your
modem is selected.
- Sound should be set to on and
Dialing set to Tone.
- Make sure that Ignore dial tone is not
selected.
- Close the dialog box and select Save when
prompted.
PPP
- Click on the Apple and select Control
Panel, then select ppp.
- On the PPP connection box, registered user
should be selected.
- Enter your username and password in the appropriate
boxes, and be sure they're in lower case.
- Check the Save password
box.
- Enter the phone number for the
appropriate server in your area. This number should be listed in your
documentation from Purespeed Internet. If it's not, call us immediately at
(703) 669-3160.
- Select Connect to connect.
back |